ALFAGTV6.COM

killaz · Post by **killaz** » Tue May 19, 2020 2:09 am

Hello everybody!

I'm installing coilover pack in position of rear shocks in my Alfa 75. Are there any reinforcements required and/or how top mounts for rear suspension look in SZ/RZ setup?

Combination to install is revalved B46 + 6kg/mm spring.

Cheers!

killaz · Post by **killaz** » Wed Jun 24, 2020 12:34 pm

Well, I made some reinforcements and drove her on one track day. Everything went perfect, even improved my best lap.

75evo · Post by **75evo** » Sun Jun 28, 2020 11:32 pm

What about the dedion? The SZ has reinforcements there it seems.

killaz · Post by **killaz** » Sun Jul 05, 2020 1:00 pm

I've checked some pictures available online and haven't noticed any difference on DeDion mounts...

If you have some info or guidelines, it would be nice to share before I hit the floor like ricers do

Duk · Post by **Duk** » Mon Jul 06, 2020 3:51 pm

A good picture.

75evo · Post by **75evo** » Mon Jul 13, 2020 4:05 pm

Took some photos of my bro's SZ rear suspension. You can see the dedion is not just a slightly reinforced dedion. The strut tower is also not exactly the same.

killaz · Post by **killaz** » Fri Aug 28, 2020 11:51 am

Huh, these are really massive reinforcements on dedion and first picture I see from this angle.

Regarding strut tower... Is there additional metal profile tuck welded to chassis or something else? (I see aluminum sleeve on coilover that acts as upper stopping point)

Thank you guys, very much!

ALFAGTV6.COM

SZ/RZ rear suspension mounts

Re: SZ/RZ rear suspension mounts

Re: SZ/RZ rear suspension mounts

Re: SZ/RZ rear suspension mounts

Re: SZ/RZ rear suspension mounts

Re: SZ/RZ rear suspension mounts

Re: SZ/RZ rear suspension mounts