ok im stumped .....couldnt find a better place to post it so here it is
ive got a milano column sitting here for the "project" and i have a grant signature series wheel....
now the problem..grant does NOT make a steering wheel adapter for milano's..they do however make one for early fetta gt's and another one for the gtv6 6501 and 6502
so the question is...does a milano steering shaft at the steering wheel have the same splines and taper as a gtv6 or a fetta gt?......
i dont care about the outward appearance matching with the column plastic as i wont be using any of it.....
Gees ! Finally ! A constructive post ! hehe.......MD wrote:Two choices:
Try an Alfetta wheel on a 75 spline or
Fit an Alfetta steering colum instead- gotta be worth next to zip anyway.


French cars are shit and shit expensive to service and bloody awful and unreliable and expensive and friends don't let friends drive french cars and you wait years for parts.
well a momo 6bolt wont help me with a grant 5 bolt wheel :p
dug out my old fetta wheel from the rotted out 99cent alfetta gt that i draged home last year..and it was a PERFECT fit to the splines on the milano shaft
soo now its got me wondering..so i measured the gtv6 column and the fetta wheel and theres about 1 inch of differance in the size .....so my guess is that a GTV6 adapter is wider to match the column and the fetta is narrower to match its smaller column....guess i con the local shop into ordering both so i can see which one i find more sexy!
dug out my old fetta wheel from the rotted out 99cent alfetta gt that i draged home last year..and it was a PERFECT fit to the splines on the milano shaft
soo now its got me wondering..so i measured the gtv6 column and the fetta wheel and theres about 1 inch of differance in the size .....so my guess is that a GTV6 adapter is wider to match the column and the fetta is narrower to match its smaller column....guess i con the local shop into ordering both so i can see which one i find more sexy!
