my introduction on this forum:
http://www.alfagtv6.com/bb/viewtopic.php?t=2218
or my web page:
http://matforacing.se/index.php/830426
http://matforacing.se/index.php/812867
I plan to use the ECU and harness from the 164 to get is as standard it could be regarding the engine and control of it.
However now I have connected eveything (I hope) and I cannot get it to start.
![Sad :(](./images/smilies/icon_sad.gif)
It seems that I'm not getting ground from the ECU to the fuel pump relay and nor I'm I getting current or pulse to the ignition modules.
When I hotwire the ground to the fule pump relay and crank the starter I get fuel into the cylinders but no spark.
I'm afraid it has to do with the immobilizer but I have tried to bypass it in different ways since I havent got the alarm box.
Any suggestions will be very appreciated!
I know that it can be a bit odd to talk about bypassing the immobilizer on an open forum but if so don't hesitate to send me a message so we can discuss it offline.