Dual length manifolds so seem more common on engines with fixed camshaft timing.
But Toyota did use interlinked dual plenum chambers on some of its 6 cylinder engines, both straight 6 and V6 without any form of variable cam timing. And there was that Nissan engine I posted a pic at the very beginning of the thread.
Re: Inlet Manifold Design
Yeah I still have a weakness for the first Ford Taurus SHO engine engineered by Yamaha.
I had an 89 and it was an early application of variable length intake runners.Worked extremely well.Don't believe there was any camshaft timing trickery involved.
I had an 89 and it was an early application of variable length intake runners.Worked extremely well.Don't believe there was any camshaft timing trickery involved.
1986-GTV6
1989-75 Twinspark very sadly sold-remarkable sedan !
2014 Audi Q5 3.0l TDI - torque MONSTER
1989-75 Twinspark very sadly sold-remarkable sedan !
2014 Audi Q5 3.0l TDI - torque MONSTER
Re: Inlet Manifold Design
It seems like the Porsche Varioram is probably the most devoted variable harmonics inlet manifold. It uses 3 different stages of dual length and divided plenum chambers. Long runners/divided plenums, short runners/divided plenums and short runners joined plenums.
- Attachments
-
- admision resonante vario ramp Porsche esquemas.jpg (55.42 KiB) Viewed 5581 times
Re: Inlet Manifold Design
The 360 Fezza works the same. Dependent on revs and throttle position.
Re: Inlet Manifold Design
The Ferrari F360 manifolds only have 2 different states not 3 like the Porsche system.
Re: Inlet Manifold Design
The 360 has long runners, short runners and a valve between the two plenums that either joins the Two to make 1 large plenum or when closed keeps them separated.