cold start injector
My cold start injector won`t shoot, I`ve tried 3 different ones. Could this be a wiring prob? Pin connector? Please advise.
Should be able to check the wiring with a voltmeter. I think Greg's site has the actual output you should be getting at the connector when cold if not I know there is a manual with that information in it. Here is a link to Greg's site, look up CTS and it should be right there
http://www.oldebottles.com/italiancarspage3.htm
Was there any pressure in the line when you switched the cold start injector? I switched mine out yesterday and thought I clamped it off...but obviously didn't get it good enough because i got fuel in the face! Check to make sure you have pressure going to the injector as well as the electicals from the coolant temp switch.
Rob
'84 GTV6
http://www.oldebottles.com/italiancarspage3.htm
Was there any pressure in the line when you switched the cold start injector? I switched mine out yesterday and thought I clamped it off...but obviously didn't get it good enough because i got fuel in the face! Check to make sure you have pressure going to the injector as well as the electicals from the coolant temp switch.
Rob
'84 GTV6