PietereQ
Platinum
Posts: 477 Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL
Post
by PietereQ » Thu Sep 13, 2007 8:44 am
Hi, I'm just putting the interior back together, and I'm wondering what are these wires for? Guessing power mirror but I'm not sure
Any ideas?
Thanks,
pete
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Thu Sep 13, 2007 3:38 pm
someone messed with your wiring....
PietereQ
Platinum
Posts: 477 Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL
Post
by PietereQ » Fri Sep 14, 2007 12:36 pm
x-rad wrote: someone messed with your wiring....
I gues this stands for "no" ?
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Fri Sep 14, 2007 2:44 pm
Does not look like standard wiring...have to see where they lead...also, there should be more than 4 wires if left and right mirror involved..
Just carefully pop off door panel and check....
PietereQ
Platinum
Posts: 477 Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL
Post
by PietereQ » Sun Sep 16, 2007 1:05 pm
This is euro gtv6 so only left powered mirror, they go to same harness where much more cables (including the joystick control) are. I'm confused by the wire colors, they're different on the end (on photo), and different on the controller. And no mirror to check
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Sun Sep 16, 2007 4:20 pm
pain in the ass, but either test the line or manually follow it....
from the wiring dgm...looks like red is the original harness power lead color from the fuse block (#8)to the switch AND to the mirror motor