So I've got all this faded grey plastic bits that will need to go back to thier home on the GTV. What is every one using to tidy up these parts?
I thought of spraying them with black paint. I've tried a back to black solution but it was crap. I really need the bits to be BLACK again.
-
- Gold
- Posts: 80
- Joined: Thu Nov 10, 2005 6:51 pm
- Location: Bellingham, WA, USA
- Contact:
I sprayed mine with a black plastic dye and it came out really well. Still needs another coat, but much better than it was.
I think I used the Krylon Fusion brand.
I think I used the Krylon Fusion brand.
tImBoWe
Here's the deal.
Give everything a thorough wash. Let dry. Wipe over with a grease and wax remover solution. Let dry.
Important.
Paint all bits with a PLASTIC PRIMER made especially for the job.
Follow up with colour and paint formulation of your choice.
Bonus. Stops U.V. breakdown of the plastics and will make them last as long as the metal bits.
Here's the deal.
Give everything a thorough wash. Let dry. Wipe over with a grease and wax remover solution. Let dry.
Important.
Paint all bits with a PLASTIC PRIMER made especially for the job.
Follow up with colour and paint formulation of your choice.
Bonus. Stops U.V. breakdown of the plastics and will make them last as long as the metal bits.
Transaxle Alfas Haul More Arse