Page 1 of 1
What's the size (bore) of the clutch master?
Posted: Wed Feb 22, 2006 1:14 pm
by Cannibal
I am going to replace the clutch master with a wilwood master and just wondered what size the stock master cylinder is so I can closely match it up. This is an 87 Milano 3.0 (USA).
Thanks,
Steve
Posted: Thu Feb 23, 2006 12:25 am
by Dennis
Realemotorsport used a 3/4 for his clutchmaster on the race-gtv. He says the feel is great, so I would try that first!
Posted: Thu Feb 23, 2006 9:38 pm
by Cannibal
Cool, thanks for the info. I just bought two 3/4 inch wilwood masters to to replace the ABS system. Another 3/4 inch will make it nice to keep a spare or rebuild kit on hand.
Thanks,
Steve