- junglejustice
- Verde
- Posts: 624
- Joined: Fri Nov 26, 2004 1:19 am
- Location: Granolaville, WA
Leaving SA in 48 hours
Bringing back some exchange heads, and headers and GTA cams and Group 1 cams and ECUs and coil pack conversions for 12 valvers and what have you with me...
...to Alfa, or not to Alfa? That is the question...
- junglejustice
- Verde
- Posts: 624
- Joined: Fri Nov 26, 2004 1:19 am
- Location: Granolaville, WA
Back!
I'm back!
Yes, I brought back:
GTA 24 valve cams
12 valve Group 1 cams (2.5 or 3.0)
Exchange 12 valve Group 1 heads (2.5 and 3.0)
Gotech Standard and Pro ECUs with harness
12 valve Milano/GTV6 headers ceramic coated inside and out
24 valve Milano/GTV6 headers ceramic coated inside and out
166 front brake discs,
6 pot and 8 pot Praggia brake calipers
Exchange 4 cylinder race head
VR6 coil-packs for 12 valve or 24 valve to run with GoTech ECUs
50mm Intake plenums
50mm cast aluminium intake runners
Some things still enroute - crated....
Came home to find more 100mm pistons, gapless rings and more steel rods waiting - (headed back to SA again I guess) - some lucky SOB here just bought a 3.2 GTA motor for his Milano! (4 24 valve donor cores ready to go!
In the interest of keeping the threads technical, please contact me off-forum at www.glenwoodalfa.com or call me at 425.941.4747 for pricing.
Willing to discuss technical questions here.
Yes, I brought back:
GTA 24 valve cams
12 valve Group 1 cams (2.5 or 3.0)
Exchange 12 valve Group 1 heads (2.5 and 3.0)
Gotech Standard and Pro ECUs with harness
12 valve Milano/GTV6 headers ceramic coated inside and out
24 valve Milano/GTV6 headers ceramic coated inside and out
166 front brake discs,
6 pot and 8 pot Praggia brake calipers
Exchange 4 cylinder race head
VR6 coil-packs for 12 valve or 24 valve to run with GoTech ECUs
50mm Intake plenums
50mm cast aluminium intake runners
Some things still enroute - crated....
Came home to find more 100mm pistons, gapless rings and more steel rods waiting - (headed back to SA again I guess) - some lucky SOB here just bought a 3.2 GTA motor for his Milano! (4 24 valve donor cores ready to go!
In the interest of keeping the threads technical, please contact me off-forum at www.glenwoodalfa.com or call me at 425.941.4747 for pricing.
Willing to discuss technical questions here.
...to Alfa, or not to Alfa? That is the question...
- junglejustice
- Verde
- Posts: 624
- Joined: Fri Nov 26, 2004 1:19 am
- Location: Granolaville, WA
Welcome back in the US. Good to meet you finally but it was strange we both had to go halfway across the world to do so. Anyway, it seems like I will be in Seattle middle February in 06. I will let you know the finer details when I have them.
Neil C.
85 GTV 6 "Benna della ruggine e mangiatore dello zoccolo"
85 GTV 6 "Benna della ruggine e mangiatore dello zoccolo"
- junglejustice
- Verde
- Posts: 624
- Joined: Fri Nov 26, 2004 1:19 am
- Location: Granolaville, WA