ALFAGTV6.COM

Post by **Zamani** » Fri Aug 25, 2006 3:17 pm

How much does a GTA crank and the piston set cost?

Greg Gordon · Post by **Greg Gordon** » Fri Aug 25, 2006 8:31 pm

and rods, we want the rods.

Post by **Zamani** » Fri Aug 25, 2006 8:39 pm

The rods are the same as all V6s. Only change is, the newer V6s are "better" because of newer casting design.

Greg Gordon · Post by **Greg Gordon** » Sat Aug 26, 2006 10:36 am

Zamani I am PMing you.

Post by **Zamani** » Mon Aug 28, 2006 11:51 am

Is it possible to send out the 3.0 crank to a shop to increase the stroke? Has anyone done so?

Micke · Post by **Micke** » Mon Aug 28, 2006 12:01 pm

It's possible but you do NOT want to know what it costs.

Sud_Oscar · Post by **Sud_Oscar** » Thu Aug 31, 2006 10:13 am

I asked a Swedish dealer (Alfa Rosso) about the price for a GTA crank.
15430 SEK + tax or 1670 Euro or 2140 USD.

/Sud_Oscar

pancho · Post by **pancho** » Thu Aug 31, 2006 3:13 pm

this is an issue I am trying to get over, either I bite the bullet and get the GTA crank or I go the turbo route. I have the gta pistons and cams but no crank.

I can extract a lot more power through the turbo way rather than with the gta crank. And the cost will probably be comparable as long as I dont want to run high boost.

rz · Post by rz » Wed Sep 13, 2006 8:14 am

price crank 811 euro
rod 79 euro
piston plus cylinder 120 euro
plus 21%taxes for gta !!

Post by **Zamani** » Wed Sep 13, 2006 8:34 am

That's not a bad price!

rz · Post by rz » Wed Sep 13, 2006 10:39 am

it is a super price!!!

Daniel · Post by **Daniel** » Wed Sep 13, 2006 12:44 pm

Hey RZ, how much for a set of GTA cams?
Anyone know the differences between these and a '95 164 24v set ?

rz · Post by rz » Wed Sep 13, 2006 2:23 pm

don't know that price!but i think cams only will not do the job!
you need exactly the same setup and pistons to have an optimal result.
just quoted these prices because i was interested in a conversion to 3,2 ,but with a 12v head i think the result will not be satisfying for me.
pistons are made for 24v heads

tectoteam · Post by **tectoteam** » Thu Sep 14, 2006 6:18 am

rz wrote:price crank 811 euro
rod 79 euro
piston plus cylinder 120 euro
plus 21%taxes for gta !!

RZ :

Tell me:
Were (who) that price come from ?

rz · Post by rz » Fri Sep 15, 2006 12:05 am

www.tuynder.nl
this man has everything for alfa romeo,fiat,lancia,some maserati;(new parts)
at about 50% of the normal price
they speak english and will send everything everywhere.
and i don't have any shares in this company

ALFAGTV6.COM

GTA crank and piston cost?

GTA crank price