75 TS 3.0 V6 24v project
Posted: Thu Nov 26, 2015 4:48 am
I'm Jelmer from the Netherlands and I'm putting a 3.0 V6 24v in my 75 TS.
The 75 is fitted with Merwede springs, Gaz shocks, polyurethane everywhere and a 27mm torsion bar. I didn't do anything about the front ride height because the V6 will change this.
The "new" engine:
And a donor 75 2.5 V6 that I bought for the sump, tail piece, flywheel and therostat housing:
I ordered a lot of new parts for the swap but I still need some used parts like the coolant "T"'s that a 75 V6 uses, a Motronic pulley and the brackets for the alternator and power steering pump. I anyone has these parts, please let me know
The 75 is fitted with Merwede springs, Gaz shocks, polyurethane everywhere and a 27mm torsion bar. I didn't do anything about the front ride height because the V6 will change this.
The "new" engine:
And a donor 75 2.5 V6 that I bought for the sump, tail piece, flywheel and therostat housing:
I ordered a lot of new parts for the swap but I still need some used parts like the coolant "T"'s that a 75 V6 uses, a Motronic pulley and the brackets for the alternator and power steering pump. I anyone has these parts, please let me know