Page 1 of 1
Steve R's Guide
Posted: Sat Jan 20, 2007 11:08 pm
by tImBoWe
Can some one post a link to Steve R's Megasquirt install and build guide. I've been searching high and low and am having trouble locating it.
Cheerz Tim.
Posted: Sun Jan 21, 2007 3:13 am
by Murray
Tim it's on the main page in the "Technical" section.Here's a link. What are you building MSI or II ? MS has evolved quite a bit since Steve wrote this so many of the mods. he used are not applicable to MSII.I've just built a second MSII (winter is long in Canada
) and it's 100% built per the standard MSII instructions.Car started first try and I am now controlling my ignition as well as fuel.Come back here with your questions.There's a few of us sickos who've completed this sucessfully so ask away.
http://www.alfagtv6.com/MegaSquirt/Megasquirt.htm
Posted: Sun Jan 21, 2007 10:40 pm
by tImBoWe
Orrrr. That main page.. Ta for the link.
Murray planning on getting the MS2 v3 as I would be looking to learn about the fuel side the after that get into the ignition department. Still at the beginning stages of the MS introduction manual at the site. Once I've studied up as much info there I'll oder a kit from DIY Auto tune.
Gonna be a bit of a learning curve for me but thats what they say the kit is designed for. I'm allways up for an extra horse or ten as well.
Just one quick question tho... Does my 2.5 have a VR type ignition?
Cheerz Tim.
Re: Steve R's Guide
Posted: Mon Aug 11, 2008 9:43 am
by Paul Bird
Hi Murry,
I am trying to put together my MS11 V3, I would appreciate some photo's if you have any as it will compliment the wireing diagrammes I have and hopefully make the installasion smoother.
Cheers
Paul Uk