MR2 Zig
Verde
Posts: 766 Joined: Tue Jun 13, 2006 9:47 pm
Location: Fresno, Ca.
Contact:
Post
by MR2 Zig » Sun May 13, 2007 1:48 pm
Hey! that looks nice.
What is it from? Is it lighter than stock? How is the fit on the off side (side not shown in pics)?
Scott
sh0rtlife
Verde
Posts: 536 Joined: Fri Jun 02, 2006 7:45 am
Location: portland, oregon, USA
Post
by sh0rtlife » Sun May 13, 2007 2:47 pm
on the right color bodys i can see that looking great...i think the body color air dam helps too
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Sun May 13, 2007 2:48 pm
Much much lighter than aluminum beams (weigh about ?8lbs each)...these came off an Alfetta with similar body style...they are tight on the sides (about 1/4 inch from paint) ...will grind them down for nice fit...
have to weld up some brackets as the old ones are bent...
sh0rtlife
Verde
Posts: 536 Joined: Fri Jun 02, 2006 7:45 am
Location: portland, oregon, USA
Post
by sh0rtlife » Sun May 13, 2007 7:01 pm
overall i must say that it looks great on there but is seemingly "missing" something...tho ive no clue what it would be...maybe a small thin black rubber strip down the centerline of the bumper?
Nicholas
Silver
Posts: 36 Joined: Tue Mar 01, 2005 1:59 am
Location: Sydney, Australia
Post
by Nicholas » Mon May 14, 2007 2:05 am
It looks pretty good, a bit retro if you can make an already retro car more retro. lol
I have recently fitted an 86 GP edition front nose to my car. Getting it to sit right is a bit of a bracket fiddle.
I just have to raise it at the back a bit now.
As you can see (for those familiar with the GP edition) I have modified the air intake and filled the headlight washers holes.
I should finish mounting it very soon.
Attachments
DSC01928.JPG (185.49 KiB) Viewed 10023 times
Nick
GTV630
GarthW
Verde
Posts: 631 Joined: Sat Mar 24, 2007 12:43 am
Location: Melbourne, Australia
Post
by GarthW » Tue May 15, 2007 4:07 am
X-rad, you got pics of the rear...?
Selling 1985 GTV6.
Ecu and injectors, lightened.....plays music.
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Tue May 15, 2007 6:07 pm
Funny, Nic...
Will post some rear pics..
Shortlife: Missing black tape stripe and two fat black rubber blocks..part of US code at one time, I guess...they were half falling off anyway
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Tue May 15, 2007 6:20 pm
pic of stern...real rough layout..needs lot of work
Attachments
avid.jpg (92.68 KiB) Viewed 9941 times
sh0rtlife
Verde
Posts: 536 Joined: Fri Jun 02, 2006 7:45 am
Location: portland, oregon, USA
Post
by sh0rtlife » Tue May 15, 2007 6:23 pm
ahhh ok i knew something just didnt quite look right...i never liked the rubber "pushers" but the black tape line finishes the bumper off
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Tue May 15, 2007 6:27 pm
yeah, I agree...four aluminum rivets drilled out and they fall right off! Actually, they were falling off already...
Got a set of nice chrome mirrors to replace the power ones, too.
Nicholas
Silver
Posts: 36 Joined: Tue Mar 01, 2005 1:59 am
Location: Sydney, Australia
Post
by Nicholas » Wed May 16, 2007 1:44 am
What are you saying about the power mirrors?... I like electric motors that are louder than my engine. lol
Nick
GTV630
x-rad
Verde
Posts: 1223 Joined: Sat Mar 05, 2005 1:21 pm
Location: Canton, Ohio, USA
Post
by x-rad » Wed May 16, 2007 5:06 am
well, since I can practically reach out the passenger window to adjust it, I think I will just use two of these sharp looking mirrors to compliment the bumps and trim....
just a matter of paint color now....farrari red? bright silver? jet black? original white??
any thoughts????
Attachments
avid 001.jpg (117.26 KiB) Viewed 9898 times
sh0rtlife
Verde
Posts: 536 Joined: Fri Jun 02, 2006 7:45 am
Location: portland, oregon, USA
Post
by sh0rtlife » Wed May 16, 2007 10:31 am
me...id pop the backs offf the power mirrors and have em chromed and put em back on
as for the tiny mirrors you have...id keep the white trim
bteoh
Platinum
Posts: 210 Joined: Wed Dec 15, 2004 7:44 pm
Location: Perth, Western Australia
Post
by bteoh » Wed May 16, 2007 6:12 pm
X-rad,
Seems like you are trying to convert the car to an alfetta GT 1979-81? Why not just get one instead of going backwards?
Attachments
AlfettaGT.jpg (50.2 KiB) Viewed 9866 times
AlfettaGT2.jpg (37.62 KiB) Viewed 9869 times