ALFAGTV6.COM

akilljoy I suspect you're up against a rear caliper rebuild/replacement.Obviously you've checked your fluid level and confirmed there's no air in the system ? These rear calipers can be finicky when hydraulics aren't right.They're not your garden variety caliper.If you decide to take on the rebuild...

So a little while ago ( like 7 months ) I changed the rear brake pads and went through the whole process of adjusting them. I even adjusted them with a feeler gage (which took time ) however i was never able to get the rear ebrake adjusted correctly and it would only lock on one rotor. It would also...

On the stock exhaust system for my US 86' GTV6 there is a little spacer between the headers and the header back exhaust system. As I have read it is to "convert" the flange style to the from euro to american BS. Through some stuff I would rather not go into (stupidity mostly), I have manag...

Thanks so much for the info!

Thanks man. Its good to hear someone was using them.

Hi , my '86 gtv6's old shocks are a little done. I want to get some new ones and there are some used AVOs avalible. They have dampener adjustments and look in resonable shape. They are a good price too. I tried to do a little research and it looks like AVOs dont have a good reputation. I can get bil...

(another update) i am waiting on the replacement clutch slave cyclinder. In addition to to that , i was under the car messing with the clutch fork (pressing and pulling on it to more or less see if i could get the clutch to seperate, just because i was curious) and i was able to pull the fork straig...

( update) i got a new master cly, and istalled it, however i believe i installed it wrong. THe shaft that pushes the master cly pistoon in was at a wierd angle and the clutch pedal sat to high. Two days after i insatalled it, the shaft actully poped out of the master clutch master cly and i rebiult ...

I have no clutch seperation, so i cant put it in gear unless its roling and even that is extremly difficult. I assume its a bad clutch master cyl or slave cly. Any ideas besides those that i should look for ?

I have no clutch seperation, so i cant put it in gear unless its roling and even that is extremly difficult. I assume its a bad clutch master cyl or slave cly. Any ideas besides those that i should look for ?