ALFAGTV6.COM

another solution is to modify the oil pump to fit it in the original sump.

Some picture : http://alfaromeosportclub.forumactif.co ... -pour-gtv6

It's what I plan to do it. But i's better if I can can make it in on part.

Yannick take a transmision from BMW série 3, He cut the front tripode, cut the driveshaft in the good dimension. Next he put a new tripod machined (it's me who draw it), and the driveshaft was welded and balanced. For the rear the adaptateur is machined too, but machined 2 times because I don't have...

Using Mats concept as a guideline, I have had the rear flange manufactured recently, it still needs fabrication though to fit the CVJ :x http://images50.fotosik.pl/91/340bd5273562f949med.jpg http://images39.fotosik.pl/87/fb4f2af46b3449efmed.jpg http://images50.fotosik.pl/91/985fc8cab350cef0med.jpg ...

few video, outiside my ca

http://www.dailymotion.com/video/x213sv ... -2014_auto

inside my car

http://www.dailymotion.com/video/x213m7 ... 14h30_auto

http://www.dailymotion.com/video/x215cc ... 4-11h_auto

I don't know the rate of the spring

Yes the alfa 6 hub are longer than 75 hub, but with this extra longer the lower arm is a litle bit down than the 75. IT's look not to bad in vidéo http://www.dailymotion.com/video/x11o0kx_lurcy-pneu_auto In the befing of the year I have also rebuild the engine (I broke it at Monthlery) and ad a scra...

Not the 75 standard front hub, but the alfa 6 front hub

My first trackday track : 1.8 carb 124HP with 1.6 gearbox, alfa 6 drivetrain and brake http://hexenberg.free.fr/75/_HQ0R1911.JPG My new car with v6 24v engine from 164 v6 with motronic and big pipe from 166 read and front hub from alfa 6 (5x112) Front brake mercede classe S of 330mm with peugeot 607...

my headers from original 164 24v





when I need more HP, I will change it

I made one with a 164 shifter : http://hexenberg.free.fr/75/boite.htm

Dijon 2011 with the TS motor vs my 75 1.8 carb

http://www.dailymotion.com/video/xhq6vw ... -2011_auto

the gatouille track gtv in action

http://www.dailymotion.com/video/xk4qaj ... idi-1_auto

a free simple chrono with windowsCE gps :

http://sebastien.guchet.free.fr/ChronoGPS/ChronoGPS.htm

and the my program read the gps file and print it :

http://hexenberg.free.fr/chrono/chronog ... mploii.htm