ALFAGTV6.COM

do you have pictures of the new driveshaft with bmw differential?

I've infinite problems with the mix bmw rubber joint/cv rear joint, now we try with double cv joint but now I see you advise against to use it..

How many camber do you have in the rear wheel?

A friend who run with a 75 gr. A say me he have -2.5 degrees, but he has the original transmission..


thanks

I try to answer to all in this post. there is two reason we decided to use this differential: the first, my mechanich made (not finish yet) his gtv6 3.0 biturbos with 6 gearbox and 6 diff. he bought a couple of diff, one 11.50 (sell to me) and one automatic use on his gtv. I pay it not much.. the se...

Thanks I use the bearing of 330d, we think it's enough..

But I've a problem with the differential... it's very much short.. I try to search the 12/46 of alfa 6 td, but it's impossibile to find.. I hope I can find someone who make it without the original champion...

wait wait!! pheraps I wrote wrong.. This is not the clutch for dual mass flywheel, this is the modify for put the normal clutch on the bmw gearbox with the dual mass flywheel from fabric...

https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xtf1/v/l/t1.0-9/12227097_10206818233648124_8349775771997405917_n.jpg?oh=56d8afa70bd5e801f2e51130ce311ca7&oe=56AD0AD3 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12249586_10206818233768127_6453028872783143476_n.jpg?oh=1df6300694523f9e6e...

https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/12088020_10206642006322551_1070149499886927825_n.jpg?oh=3257ad4884fa0d02a4f79c2784b9085c&oe=56D0B1EF https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/12096126_10206642006042544_7097103696461246512_n.jpg?oh=eaec469c5c0d90916658...

thanks for this suggestion :D show it to my mechanics, but he want use rubber joint, he told me it has 4 holes and a metal cage around. Made a new driveshaft. He told if I broken one of this rubber joint he change it free ahahahhaahah at the moment I can't go on with the works, mechanic holiday :rol...

thanks for the answer...

I thought gtv6, 75 3.0 and turbo have the same side shaft, but if you tell me this I was wrong.

75 and sei has the same side shaft, gtv6 have shorter side like my mechanics (on his alfetta he has a mix sei-gtv6)

Why I can't put differential on center? there's no space?

the 6 drive shaft is the same of 75 turbo drive shaft? my mechanic say me the 6 drive is 3 cm shorter than the turbo. I've 4 turbo shaft on house. Then I buy 2 6 shaft of a 2.5 v6 carbs, open the pack and I see it's the same of 75 :evil: the seller says me (and send me photo) of the 6 that is disass...

thanks for the photo.. the first time I go to my mechanic I show it.. I don't wanna use the original gearbox, it's very slow, must buy a special clutch, then if I wanna to use bmw gearbox i must to cut the chassis, and if it's varnished it's a problem... Why do you use a very small gear lever? I wan...

I buy this gearbox in internet, I don't think to search the bmw tunnel .. my mechanic says me he does it artigianal.. if you want, can post it in this thread

I buy the gearbox, from 330d e46 6 speed https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/1450176_10204903335576869_1438996069340403209_n.jpg?oh=86a60ec150419851976b7cdf8b1a2dbd&oe=554FA011&__gda__=1435850280_c2107669c7a7a5d0a6b0442a6059df4c and install the a/c radiator https:...

Ahahah thanks :) I studied in a little school ten years ago, when we studied english only an hour a week, but in it I was very good.. This forum is very complete about the elaboration of transaxle alfa, expecially the topic of 1.8 turbo, very good people write in it.. In italy nobody do work like th...

For the moment I don't buy a complete 6, we are still looking for the bmw gearbox but we don't find it nearly us.. the next month trasport the car to my mechanic...



Sorry but I don't have photo of his gtv6, the first time he lift it up I make them..