ALFAGTV6.COM

Hi Michael. Just thinking on the run here. Not a job I have done before so this is a suggestion to get the topic moving. The hinge pin is called a Roll Pin Obviously the pin will only come out by some form of impact. Getting a direct square on the bottom for a PUSH impact is problematic. Therefore I...

Has everybody moved to E-Scooters??
Where are all the projects

Post them if you gottem.

Yes it does Zamani. It is turbo charged. No idea how much boost.

Hi bteoh. The frontal profile of the Alfetta GTV whether in 2 or 2.5 guise is an almost perfect design and very difficult to mess with. Very hard to get spoiler effects so they don't break off during trailer loading/unloading especially if the vehicle is lowered. I threw this one on to merely protec...

I know that in the northern hemisphere you are all tucked in and sitting around the fire hugging that tablet for company while we are fighting off bushfires, flooding and enough sunburn to fry eggs on the bonnet (hood). If you don't have enough boredom in your life, try using 5 minutes up on a vinta...

Hi Kevin, Well mate in the days of old when knights were bold and sheep were afraid, I was supplied with an 8v twin spark from the best friend man could have. It came from the land of funny cigarettes and flour mill turbines. I think they call them wind mills. If you still have a need for one let me...

Man, this topic set has huge diversity and has built up a big library over the years. You can spend hours goofing off and enjoying it. Here is a clip of the Giocattaolo running in the Targa Tasmania 2022. Check out the V8 noise..
https://www.youtube.com/watch?v=WOaFNfCmQkY

Alan it is OK to bench test a fuel pump on the following conditions:- Secure the pump so that it stays in a fixed position. Pump a non flammable liquid like water instead of fuel Use an inline fuse between the pump connections and the battery. 20 amps max. Have some where to deliver the pumped liqui...

Kevin,
If you consistently do high revs, it may be wise to increase the size of your alternator pulley to slow it down so it doesn't thrash itself to pieces. It will still make all the power just the same unless you do the opposite and idle it everywhere...

Alan, Something tells me that the operation of the fuel pump coincides with the starter motor. Just turning the ignition "On" will not initiate the fuel pump operation. The simplest way to check if your fuel pump is getting power is to make up a little test lead using two alligator clips, ...

TBs as pictured suggest top end power coming from high revs. Irrespective of the lengths, induction without filtration for a road car is a recepe for rapid wear and under bonnet fires.

Wow !! More than a year and half gone without any progress on the 75. However, there is a reason for this. I have been busy quietly restoring an Alfetta GTV 2.0 that has been sitting in my workshop for 5 years waiting to be the back up car if I have a major track incident with Orange Cab. Thankfully...

If you haven't found an original part by now then this might help. Just source a thick walled ordinary garden hose. Cut a length equal to the circumference of your spring. Make a split cut along the length of the off-cut piece. Wrap it around the spring base. If it requires it, use some light cable ...

Good luck with the fish and chips.

Kevin, Stop. STOP. SSSSSTTTOOOPPP !!! You got the concept all arse about face. The idea is:- Take the left bank left with a larger muffler only. Take the right bank with a larger muffler only. DO NOT COMBINE ANYTHING. The idea being that you distribute the noise to two locations and not concentrate ...