ALFAGTV6.COM

Perhaps this is a bit offtopic, but ...

I've seen these throttle bodies on Alfabb.com.

Is it possible to drill in half the original intake base plates, add bushes and throttle blades and do something similar?

Dear alfistis, I have taken measurements of the position of the screws on the carter and the interior walls. If someone needs to do his separator, here it is: ISO-10303-21; HEADER; FILE_DESCRIPTION(('CATIA V5 STEP Exchange'),'2;1'); FILE_NAME('C:\\Documents and Settings\\Ana\\My Documents\\Part1.stp...

The position of the holes makes it very difficult for me to represent that figure in CATIA. I am currently adapting a 3.2 engine with chain oil pump for my GTV6. I wanted to talk about the transformation of my GTV6 when it was something more advanced. Anyway, I hang some pictures and I pass some lin...

Of course.

Does anyone have the CAD design of the sump gasket?

Dear fellow forum: As you know, my alfa gtv6 has a dual clutch gearbox, with the common problem that the first disc, closest to the pressure plate, touches far more than the second. Such has been this erosion, which once spent all asbestos, has spent a metallic circle, and the plates that hold the b...

I've been sanding and painting the radiator, fans, etc. I have replaced some pipes that had been cracked and except these wires since they are all repaired. Yesterday I cleaned the tank, refuel and I put the battery. By giving the contact, the starter turned, but I was alarmed that no fuel come out ...

hello again! I have a problem with several wires .. The air conditioning pump out a red wire that connects to a sensor that goes in the tank for air conditioning. Along with the red wire connects to the tank a black wire that is cut. Wiper connector appears black wire is also cut off. In a connectio...

Hi again! I brought some pictures http://picasaweb.google.com/110986585258511831209/GTV# Is it safe to cut the length of wire eaten by rats and replaced by a normal power cable? I have another question about changing the timing belt. The gears on the camshafts are marks for alignment, but in my case...

I have a GTV6 2.5 with air conditioning, which the rats have eaten many of the motor cables. Among them, several of which are located next to the wiper motor. and some of which are located between the headlights and wiper tank. Is there any way to get these cables or wiring diagram to tell me the co...