ALFAGTV6.COM

The other day, driving in reverse , my car stalled and could´'t get it started again. The in-tank plastic filter was torn and the fuel pump got blocked. I have bought a new bosch pump but cannot get hold of a replacement filter. If I can´t buy one I will fit one under the car before the pump. Does a...

This is an emergency. I bought a set of Zender milanos (17 x 7,5, ET 25) on ebay for my gtv6. In order to comply with spanish legislation I decided to fit 205/45 Michelin Pilot Tyres ; This would not vary the overall diameter of the wheel. Surprise !!! They rub on the front spoiler and also at the b...

Thank you both for your help. I have fixed the reels on the horizontal metal part behind the rear seat , one on each end, there are fixing points already there, but the left reel is to close to the separator and belt will not work properly, I was wondering if it could be moved 2 or cms to the center...

Could somebody please explain what this is for. Can I move it or delete it from my GTV6. I nned space for new 3 point rear seat belts.

Regards,


Pancho

I have just bought a set of Zender Milano wheels (17"x 7,5 ET25) for my GTV6. They are in quite good condition but the laquare finish is peeling off in certain areas and salt has affected the wheels also (grey areas). Can they be refurbished or painted? Any suggestions? In order to respect the ...

Could anybody help me in finding door weather-stripping for my GTV6. I am having the car painted this month and need new rubber striiping to fit small triangles, doors and rearside windows (interior and exterior). I mangaed to get the door and boot seals from Highwood in the UK but not the rest . Th...

For the rad I paid 114Euros (dealer price) but regular price was 175. The twin fans you can get from a used parts store as I did (90Euros) and then rebuild them (no parts required, just cleaning the inside of the motors,smooth out the the collector and brushes, grease the bearings and thats it. The...

Thanks Tectoteam for your help. Another questions. Is that rubber glued to the door . How do i get it back on again. Wll it break if i try to remove it?

Regards,


Pancho

I have a 1983 gtv6. i am stripping the car for a repaint but cannot get the triangle glass out. Its held in place by a small peice of metal fixed to the top of the door by two rivet These are under a rubber surrounding the door. How does this rubber come off. I can't see rivets nor screws to hold ot...

My mechanic has finally finished rebuilding my car to standard specs. The following work has been carried out so far: Engine: Many new parts following Murrays shopping list. My mechanic refused to fit Total Seal rings ( by the way I am seling the set for a resonable price). preferred to fit new stan...

Nice to hear from you again Jose. I thought you were visiting La Manga this summer. What happened?

Do you recall what is supposed to be in between of the heat sheilds , as mentioned previously I found bits of cardboard stappled to the back of the sheilds. Is it worth replacing?

Regards,


Pancho

Thanks MD for your reply. I am attaching a photo of both plates I referred to.

Could somebody tell me what is supposed to be in front of the rack and pinion component on my GTV6. There are two metal plates on either side screwed to the chasis with some remaining cardboard or similar attached to the back of both plates. Nothing else. What is missing and is it worth replacing. I...

Thanks MD for your comments. Nice to hear frm an Auzie. I was born in Subiaco, Perth, WA but came to Spain when I was 11, Spanish parents emigrated to Australia in the 60's.

Thanks again.

Regards,

Pancho

How can I get hold of the following 16"wheels in Europe, new or used, preferebly in Spain, for my GTV6:

Momo Star , 3 peice or
Speedline 3 peice or
Compomotive TS.

I have had a look locally with no luck.

Regards,

Pancho