ALFAGTV6.COM

halo sporttunergtv6
when I replaced my rear bearings I bought a 50mm socket from gedore and cut the lip with grinder to match ring and I have used it with impact wrench with out breaking it
good luck and remember to heat the bearing casing when fitting new bearings

hi tmundy i made the tool needed to remove the ring that keeps the bearing in place. I bought a 50mm socket and spare ring then i cut the socket with angle grinder a little bit bigger than the ring splices and carefully filed it for perfect fit. Then u can torque the ring to 260nm after u are done i...

Hi alfa nola wondering if u got a solution to your suspension problem. My wife's alfa gtv does it aswell. The front de dion bush was found worn i had it replaced, aswell as the watts link and the two bars that goes to the body but it still puls voilently left if i go over a ditch in the road i repla...

trust me its a girl thing when a female climbs in an alfa shes not scared and wants to go fast but it will only hapen in an alfa

hallo everybody
serch for "alfetta gt gtv history collage" it will make u feel better
I get a wet spot in my pants when that gtv6 pulls that corvette
enjoy tata

hi GarthW
hope this info helps,some ignition systems needs a resistor between the ecu and the dizzy to help get the timing right.