Search found 5 matches

by bobsiopener
Tue Oct 16, 2007 12:36 pm
Forum: Fuel, Electrical & ignition (stock Bosch)
Topic: Downsides to running a 2.5 liter ECU with a 3.0?
Replies: 12
Views: 7268

Hi Grant, I would be worried about wide open throttle situations. When you go WOT the ECU switches to open feedback and doesn't look at the O2 sensor. This means that it would look at the rpm and just dump in the amount of fuel it was programmed for a 2.5L. This might be an acceptable level because ...
by bobsiopener
Thu Oct 19, 2006 11:25 am
Forum: Site Feedback / suggestions
Topic: Subject of thread in recent posts
Replies: 0
Views: 4226

Subject of thread in recent posts

It would be nice to see the subject of the thread in the last post column on the right of the main page
by bobsiopener
Sat Oct 14, 2006 1:15 pm
Forum: Gearbox, Clutch and Driveshaft
Topic: Slave Cylinder
Replies: 26
Views: 20575

Hi Carson,
I know of someone in NJ who has one but you might try san diego alfa. I had seen IAP selling them for $28 and was suprised because Its such a small peice but since I didn't need one I didn't shop around. Good luck
Bob
by bobsiopener
Wed Oct 11, 2006 4:32 am
Forum: Gearbox, Clutch and Driveshaft
Topic: Slave Cylinder
Replies: 26
Views: 20575

Hi Carson, Thats what goes on the slave cylinders. When I had to get a new on I looked for a rebuild kit but could not find one. I ordered the cylinder from San diego Alfa (no affiliation). The delivery is very fast and its the cheapest one out there. http://www.sandiegoalfaromeo.com/parts_detail.ph...
by bobsiopener
Tue Oct 10, 2006 6:56 pm
Forum: Gearbox, Clutch and Driveshaft
Topic: Slave Cylinder
Replies: 26
Views: 20575

Hi, I am currently doing the same fix as you. With the same symptoms. I was driving when all of a sudden the pedal lost resistance and the clutch wouldn't engage. My friend and I replaced the slave cylinder and then when driving home from fixing the slave the pivot ball pulled out of its threads. So...