Page 1 of 1
Heat shield?
Posted: Wed Nov 30, 2005 1:13 am
by Lucio
Can anyone post a pic of a GTV6 "underneath"?
I'd like to know where a kind of heat-shield has to be installed. I assume this curved metal sheet serves to shield the heat coming from the exhaust central sections but a pic would greatly help.
Molte grazie
Lucio
Italy
Posted: Wed Nov 30, 2005 5:38 am
by Scott in MN
The only heat shield on my '83 is above the catalytic converter. I wouldn't think you would have a converter on a European version.
Posted: Thu Dec 01, 2005 12:41 am
by Lucio
Scott in MN wrote:The only heat shield on my '83 is above the catalytic converter. I wouldn't think you would have a converter on a European version.
Of course not
Anyway, it is strange since I bought this spare part from a dismantled German GTV6. Any hope to get a pic of the heat shield "in action"?
Thanks
Lucio
Posted: Thu Dec 01, 2005 5:49 pm
by Hippo58
The heat shield is mounted below the front section of the propshaft. If I remeber correctly the back edge of the shield is screwed ON the crossmember below the propshaft center bearing.
Sorry I have no pics but it is a straigth forward job. Especially if the part is not bend it will easily fall into place. I think you need to lower the exhaust to fit it though.
Posted: Fri Dec 02, 2005 12:32 am
by Lucio
Hippo58 wrote:The heat shield is mounted below the front section of the propshaft. If I remeber correctly the back edge of the shield is screwed ON the crossmember below the propshaft center bearing.
Sorry I have no pics but it is a straigth forward job. Especially if the part is not bend it will easily fall into place. I think you need to lower the exhaust to fit it though.
A pic will greatly help. Any hope to find this in a pic gallery or elsewhere?
I'll post a pic of the shield I have. Yesterday I cleaned it and now it shines like new (seems aluminium, though)
Lucio
Posted: Sat Dec 03, 2005 1:10 pm
by Hippo58
I found some!
Credit to the guy they belong!
Posted: Sat Dec 03, 2005 1:58 pm
by MD
Great heat shield, suspect handling...
Posted: Mon Dec 05, 2005 12:44 am
by Lucio