Alfa 75 lightweight body parts.

Post Reply
Jim K
Verde
Verde
Posts: 1707
Joined: Tue Nov 30, 2004 12:10 am
Location: Athens,Greece

Alfa 75 lightweight body parts.

Post by Jim K » Wed Jun 06, 2007 9:29 am

I would appreciate info on a European source for lightweight 75 parts: hood, trunk lid, complete fenders, Evo nose panel, doors. GRP is ok (carbon too expensive). Do not quote well-known (and expensive) sources. Thanks in advance.
Jim K.
User avatar
rz
Platinum
Platinum
Posts: 390
Joined: Mon Jan 17, 2005 2:23 pm
Location: belgium

Post by rz » Wed Jun 06, 2007 11:22 am

hi jim,
i think ron simons can help you with a carbon fiber hood which shouldn't be that expensive :lol:
Jim K
Verde
Verde
Posts: 1707
Joined: Tue Nov 30, 2004 12:10 am
Location: Athens,Greece

Post by Jim K » Wed Jun 06, 2007 9:15 pm

Thanks Marc, I know Ron has a few parts. Some months ago, there was a post and some pics from someone in the UK making the entire set for a good price, but I can't find it. Does anyone recall where it was or who this guy is?
The parts will be used for the slow and gradual conversion of my Turbo into a street-legal track car.
Jim K.
User avatar
Zamani
Site Admin
Site Admin
Posts: 1667
Joined: Sun Nov 28, 2004 8:20 pm
Location: Cameroon

Post by Zamani » Wed Jun 06, 2007 9:52 pm

You mean:

http://www.alpha-composites.co.uk/automotive.asp#road

Or

http://www.alfabb.com/bb/forums/showthr ... light=1500

The poster says:

"If you are interesting the price is euros 1500 unfortunately the kit will came from France."

So, IF you are interesting.... however, if you play with engines all the time, can you be considered interesting? :D

Now, Baz, he is pretty interesting.....
User avatar
Micke
Verde
Verde
Posts: 810
Joined: Sun Dec 05, 2004 11:33 pm
Location: Finland
Contact:

Post by Micke » Wed Jun 06, 2007 10:30 pm

They have acceptable prices:

http://www.hrengineering.nl/index.html
Jim K
Verde
Verde
Posts: 1707
Joined: Tue Nov 30, 2004 12:10 am
Location: Athens,Greece

Post by Jim K » Thu Jun 07, 2007 6:39 am

Micke, I don't see any Alfa parts in there.
Z, the UK guy that showed his parts in this site, said he wanted ~500GBP for Evo nose, hood,fenders and trunklid, which is very good! Jose had a link to this guy if I recall.
Jim K.
User avatar
Maurizio
Verde
Verde
Posts: 679
Joined: Wed Dec 01, 2004 4:49 am
Location: the Netherlands, 153.1km from the N'ring :-)

Post by Maurizio » Thu Jun 07, 2007 2:08 pm

Micke wrote:They have acceptable prices:

http://www.hrengineering.nl/index.html
Prices from an add from on the dutch alfa forum:
Hood 6 kg E225 Polyester
boot lid 3,6 kg E150 Polyester
Back door L 3,5 kg E175 Polyester
Back door R 3,5 kg E175 Polyester
Backside bumper T-spark 3,5 kg E150 Polyester
Front bumper T-spark 3,5 kg E150 Polyester
Dash E150 Polyester
Dash E225 Carbon
Fire wall E? in development
Evolutione kit complete E1475 Polyester
Banned.. ? ;-) Daily donky.. ==> BMW 118d Image
E36M3 (3.0) Ringtool :twisted: ==> definitely BANNED!

AR 75 TS Ringtool '90, AR Spider 2000 veloce '79
Post Reply