ALFAGTV6.COM

Mats wrote:That would work, unless you get the new style lock nut in the new bearing kit...

dammit..dont false

X-rad,

can you give me informations to contact those people, please.

id like to get one to.

thank you.
G.A

this wont help you too much. if you speak about one single pad you are running milano(1.8T,ts and v6) setting. try at a local alfa part dealer this kind of part, just the disk with standart friction material is 'cheap', new for something like 100$. also whit luck, perhaps someone had one in stock......

i guess now its too late. but imo for that kind of work i would prefer tapered plug screws like the one in photo below. common in bsp threads. with a bit of locking fluid. also in australia..im far from, but i know that one of your local screw maker did some very stranges things, so why not your sho...

I hope this is the right spot for this. My speedo reads 66mph (usa) at 3000rpm. This corresponds to the tech data that says I should be going 22mph per 1000rpm. If I time the car over a distance at 3000rpm it goes 78.5 mph. So....what is not right? Speedo unit? box under the seat? Transmission? Spe...

If you get trouble after all that, i can take a photo of the rest of tools and the parts that are not visible, but i need a couple of days.

but this will help you only if you can build these after...without tools like this you cant do one thing only:destroying things with whinin music.

whue...in fact i got only one photo... :( hope this help you can see a big pizza where i put the 'watchchecker' (dont know matching word!). he is at a precise position from the center of rear axle. depending of the gear ratio. (can find this value on manuals) and then you can 'feel' the play beetwen...

TectoTeam: This is very helpful. Can you post your proceedures for setting these clearances and possibly photos of your tools. I have a Milano LSD that I plan to put into my GTV-6 one day soon. wow wow lot of things... i'll check a web site were you can download the workshope manual. and yure very ...

Could you please use simpler terminology sir? He is speaking about the play beetwen the tooths of crownwheel and pinion. perhaps... when you change the rear bearings, the two of the differencial: did you swap the 2 washers(number 12 in drawing) that are beetwen bearing outer cage and casings ? (not...

Jack_Linguini wrote:BTW:What is the stock diameter of GTV6 torsion bars ?
Jim L

Old question, perhaps you already get the answer...

I just measure it this afternoon before to trow it to the bin (the big cleaning)
It is 23.5mm. from a 1981 gtv6.

had tested to. Pure street tire ...sounds correct for the price/lifetime after that i used a set of yokohama A032R (H coumpound). and now i running the hankook Z211 (in c30 close to the A032R) they are 60% the price of yokos here. the last both is race tires, with grooves and 5000km 3Kmiles of lifet...

rz wrote:price crank 811 euro
rod 79 euro
piston plus cylinder 120 euro
plus 21%taxes for gta !!

RZ :

Tell me:
Were (who) that price come from ?

hum...tell me something.
on a pic the headligths looks like brand new ...
did they are gtv6 ones or comes from an other car ?

i'm getting crazy to find some at a descent price.

Am I the only one noticing the phantom members registering here?? I look at the profile and its gambling casinos,cellphone ringtones,offshore gambling,porno sites etc etc.... Where is housekeeping?? or am I neurotic here.. :?: Again...there is a lot more. looks like begging in the 20 july and dont ...

Mats wrote:yeah, but it's not something you would do with the GB on the car.

yep.
working layed on the floor is so boring.
and at this state; this is just 2 more things to unbolt in order to trow the GB on a table.