ALFAGTV6.COM

al-
if you go to http://membres.lycos.fr/scuderiabiscione/ and then click on the products link it is on the second page
Vittorio

i too have a 1984

please pardon my standard measurements but the badge is 11/16 of an inch from the right edge, it is 15/16 from the top edge, and 14/16 from the bottom... hope that helps
vittorio

besides... iap has the correct part for a fact because greg gordon installed them on his super verde project. i can only assume that alfabill bought the first batch of bushings from pf and never got the correct setup

i have decided to deal directly with powerflex.uk. i sent them an email a few days ago and they said they would sort it out for me. if they that i have to go through alfabill.com then i will try that, but i would really rather not... i would never buy another product from that website again... good ...

more pics...

here are the pics. that is the factory bolt in pic's 3,4,5,6

when i ordered from alfabill i was first sent the incorrect part number (pff1-201) which is for the inner control arm on the 115 series cars and this is the small stubby bushing on the right side of the pics. the 116 bushing is on the left. the metal bushing on the bottom is a "steer rite unit ...

I oredered a set of front inner control arm bushings from alfabill.com (the pff1-201's) and when i went to press those "easy to install- two piece" bushings there was no way for me to fit the metal sleeve in once i put the bushings into the control arm. The id and od of the sleeve seem to ...

DaveH wrote:Oh - forgot: I'm expecting a RWHP gain of at least 30HP, making this mod by far the greatest HP/$ investment you could buy, far exceeding that of S/C or TT

Really??
Vittorio

SamW wrote: What would the HP gain if we ditched the L-Jet along with the old tech plastic tanks? 40-50 rwhp gain?

Is that a joke? or will simply changing the expansion tank improve anything besides cool factor

Hey guys,
I just know that you have already seen these, but paul spruell makes those 3 ounce donut protectors (http://www.paulspruell.com/motorsport/r ... parts.html). They are expensive but for the piece of mind they provide i would almost buy them myself.
Vittorio

That is the enthusiasm I like to see! I also am in for two sets when and if they magically decide to make themselves ; )

Hey guys, I remember on the old forum there was a lot of talk about poly flex discs instead of those ridiculous expensive NOS rubber ones. What was the verdict? Can all three be purchased? Is it a direct swap or are there mods involved? I wouldnt even think about it but i practically have the whole ...

I had purchased Ronal rims a year and half ago and about after six months the clear coat finish started to crack and haze. I have been emailing the co. back and forth for a year now insisting that the finish is defective. However they insist that it is not. The rims have only ever been washed with a...