dammit..dont falseMats wrote:That would work, unless you get the new style lock nut in the new bearing kit...
Search found 189 matches
- Thu Oct 05, 2006 1:22 pm
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Rear bearing lock rings
- Replies: 4
- Views: 4587
- Thu Oct 05, 2006 3:51 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Rear bearing lock rings
- Replies: 4
- Views: 4587
- Thu Oct 05, 2006 3:49 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Need clutch assembly for GTV6
- Replies: 3
- Views: 4109
this wont help you too much. if you speak about one single pad you are running milano(1.8T,ts and v6) setting. try at a local alfa part dealer this kind of part, just the disk with standart friction material is 'cheap', new for something like 100$. also whit luck, perhaps someone had one in stock......
- Thu Oct 05, 2006 3:43 am
- Forum: Engine
- Topic: 7 mm grub screws
- Replies: 3
- Views: 4037
i guess now its too late. but imo for that kind of work i would prefer tapered plug screws like the one in photo below. common in bsp threads. with a bit of locking fluid. also in australia..im far from, but i know that one of your local screw maker did some very stranges things, so why not your sho...
- Thu Oct 05, 2006 3:30 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Speedo question
- Replies: 2
- Views: 3429
Re: Speedo question
I hope this is the right spot for this. My speedo reads 66mph (usa) at 3000rpm. This corresponds to the tech data that says I should be going 22mph per 1000rpm. If I time the car over a distance at 3000rpm it goes 78.5 mph. So....what is not right? Speedo unit? box under the seat? Transmission? Spe...
- Thu Oct 05, 2006 2:10 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Gear Whine letting-up on throttle
- Replies: 21
- Views: 16861
- Thu Oct 05, 2006 2:03 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Gear Whine letting-up on throttle
- Replies: 21
- Views: 16861
whue...in fact i got only one photo... :( hope this help you can see a big pizza where i put the 'watchchecker' (dont know matching word!). he is at a precise position from the center of rear axle. depending of the gear ratio. (can find this value on manuals) and then you can 'feel' the play beetwen...
- Thu Oct 05, 2006 1:37 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Gear Whine letting-up on throttle
- Replies: 21
- Views: 16861
Re: Gear Lash
TectoTeam: This is very helpful. Can you post your proceedures for setting these clearances and possibly photos of your tools. I have a Milano LSD that I plan to put into my GTV-6 one day soon. wow wow lot of things... i'll check a web site were you can download the workshope manual. and yure very ...
- Wed Oct 04, 2006 12:08 pm
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Gear Whine letting-up on throttle
- Replies: 21
- Views: 16861
Re: Lash?
Could you please use simpler terminology sir? He is speaking about the play beetwen the tooths of crownwheel and pinion. perhaps... when you change the rear bearings, the two of the differencial: did you swap the 2 washers(number 12 in drawing) that are beetwen bearing outer cage and casings ? (not...
- Wed Oct 04, 2006 11:56 am
- Forum: Suspension, Steering, Wheels, Tires
- Topic: Coilovers (again)
- Replies: 63
- Views: 45351
Re: Coilover sleeves for yellow konis ?
Old question, perhaps you already get the answer...Jack_Linguini wrote:BTW:What is the stock diameter of GTV6 torsion bars ?
Jim L
I just measure it this afternoon before to trow it to the bin (the big cleaning)
It is 23.5mm. from a 1981 gtv6.
- Mon Oct 02, 2006 6:21 am
- Forum: Race Cars and Track preparation
- Topic: Hankook Ventus R-S2 Z212 vs Falken Azenis RT-615
- Replies: 6
- Views: 5907
had tested to. Pure street tire ...sounds correct for the price/lifetime after that i used a set of yokohama A032R (H coumpound). and now i running the hankook Z211 (in c30 close to the A032R) they are 60% the price of yokos here. the last both is race tires, with grooves and 5000km 3Kmiles of lifet...
- Thu Sep 14, 2006 6:18 am
- Forum: Engine
- Topic: GTA crank and piston cost?
- Replies: 15
- Views: 10414
- Fri Sep 01, 2006 1:24 pm
- Forum: Introduce yourself - Gallery
- Topic: The Vittorio JR & SR Stable of Alfa Romeo's
- Replies: 91
- Views: 67627
- Sun Aug 20, 2006 5:54 am
- Forum: Other
- Topic: Phantoms on gtv6.com...-Barry
- Replies: 15
- Views: 10274
Re: Phantoms on gtv6.com...-Barry
Am I the only one noticing the phantom members registering here?? I look at the profile and its gambling casinos,cellphone ringtones,offshore gambling,porno sites etc etc.... Where is housekeeping?? or am I neurotic here.. :?: Again...there is a lot more. looks like begging in the 20 july and dont ...
- Sat Jul 15, 2006 12:08 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: LSD => GTV6 Transaxle?
- Replies: 21
- Views: 21832