Search found 12 matches
- Sun Dec 10, 2017 5:19 am
- Forum: Site Administration & announcements
- Topic: 1-Year Notice of Forum Closure (End of 2018)
- Replies: 25
- Views: 15483
Re: 1-Year Notice of Forum Closure (End of 2018)
Where do I sign (over the cash)...
- Tue Jul 12, 2011 2:58 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Twin Spark gearbox on 3ltr 75
- Replies: 9
- Views: 7410
Re: Twin Spark gearbox on 3ltr 75
You could use the synchro from fith gear/reverse gear from a spare gearbox, they're all the same. :wink: And on fith gear and reverse you get the least wear. :) Just make sure you know what a good synchro looks like - in case someone has been there before you and "fixed" the 2nd gear crun...
- Mon Jul 11, 2011 5:08 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Twin Spark gearbox on 3ltr 75
- Replies: 9
- Views: 7410
Re: Twin Spark gearbox on 3ltr 75
Well, I'd be inclined to give the local suppliers a bell, especially if you would like some advice with your parts... But looking further afield there is EB spares ( http://www.ebspares.co.uk/alfa75/gearbox.cfm ) among others.
Darryl.
Darryl.
- Mon Jul 04, 2011 5:10 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
Yes M8x1. Checked that much...
Welding it and retapping is a good idea - but perhaps some risk of weak result?
Welding it and retapping is a good idea - but perhaps some risk of weak result?
- Sat Jul 02, 2011 7:06 pm
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
Assuming you were replying to my most recent post, that is good news - time to find some TS output shafts...MD wrote:Yes it will be the same.
- Sat Jul 02, 2011 2:41 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
Checked - my TS has M8 flange. Brembo have it wrong (well wrong in my and Giuliettaevo2's case at least).
So keen to know if the internal shaft diameter on the TS LSD transaxle is the same as the V6? Justr trying to avoid work - I guess I should remove the output shaft on my TS and find out....
So keen to know if the internal shaft diameter on the TS LSD transaxle is the same as the V6? Justr trying to avoid work - I guess I should remove the output shaft on my TS and find out....
- Fri Jul 01, 2011 4:39 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
You can also swap the stubaxles on the wheelside for the m10 version and then use the larger driveshafts. TS uses m8. The driveshafts for the 75 are all full-length, no spacers used as far as i know off, and i've owned most models. Interesting. If the TS is M8, and the internal shafts are same diam...
- Thu Jun 30, 2011 5:31 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
I spoke too soon - a quick visual on the shafts I didn't notice the Alfetta output shafts and splines are smaller diameter. So I can't just swap the diff output shafts from an Alfetta diff (non LSD) on to a 4 pinion LSD diff to make the Alfetta half shafts/CVs fit. Note that the only reason I tried ...
- Wed Jun 15, 2011 3:34 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
I'd use a V6 clutch assy if I had one :) . And maybe if it was going to make a big difference to efficacy of clutch. I swapped the bits I had around at the weekend - all seems to fit... Its nice to not have any nasty "surprises" for once. This was just a trial fit - need to sort out a dece...
- Thu Jun 09, 2011 2:19 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Re: Fitting a V6 transaxle to an Alfetta sedan - what to swa
Good to know. Should be right as I have (assuming nothing wrong with it) the one of the Alfetta.Giuliettaevo2 wrote:There is a different in length betwen the push and the pull type clutch.
Thanks
Darryl
- Wed Jun 08, 2011 6:36 am
- Forum: Gearbox, Clutch and Driveshaft
- Topic: Fitting a V6 transaxle to an Alfetta sedan - what to swap
- Replies: 17
- Views: 12522
Fitting a V6 transaxle to an Alfetta sedan - what to swap
I have a rebuilt V6 LSD transaxle. I want to put it in an Alfetta running original 4 cylinder talshaft, axles, hubs. Thanks to the detailed descriptions in other threads here, posted by people with actual practical experience with these things, I think I know what I need to do. However, this is a st...
- Sat Feb 21, 2009 12:35 am
- Forum: Parts
- Topic: Wanted: New or Very Good Conditi Nord 2L liners
- Replies: 0
- Views: 1294
Wanted: New or Very Good Conditi Nord 2L liners
I need some liners - they must be in *really* good condition. New would be great. Will pay reasonable money. If you have a new piston/liner set thats fine too - at the right price. I don't need pistons or rings - I have a nice set of custom forgies).
Thanks
Darryl
Brisbane, Australia
Thanks
Darryl
Brisbane, Australia